iFlight Mini Revobee32 F4 32K FPV Flight Tower System 18A ESC

Sold out
USD $79.99

If you run into issues with the existing Betaflight firmware, please flash your board with this version. It's a custom version of the Omnibus for this board specifically.



The iFligh Mini Revobee32 F4 32K Flight Tower System Stack comes with OSD,5V BEC and 18A 4 in 1 BLHeli_S ESC.

The iFlight REVO Bee32 flight controller with OSD is the most advanced, performance driven, flight controller ever designed. Capable of running 32kHz gyro sample, PID loop, and motor loop, processing all calculations in real time. The Revo Bee32 is truly at the top of its class . The Revo Bee32 uses a F405 MPU and an Invensense 20608 gyro to give you the BEST performance possible. This gyro is by far the most noise free and accurate gyro available.

Difference between Acro 6DOF and Deluxe 10DOF is that Acro 6DOF Acro version has no Compass and Barometer Sensors while Deluxe 10DOF has.



The REVO Bee32 presents not only the BEST performance, but also the most STABLE performance due to the amazing vibration rejection technology implemented in iFlight. Our filters allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! For most people tuning is not even required. Our boards come preloaded with software and defaults that should fly amazing for 99% of people.

In addition to the vibration rejection technology, the SSG gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invense 20608 gyro has never been used in any flight controller before and definitely gives you the leading advantage over others.


Just go to the google store and download the latest configurator and you should be ready to connect. Drivers should no longer be needed.

Setup Simplicity

Setting up the RevoBee32 is easy. The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and remember the order 1, 2, 3, 4. Select your voltage on the bottom, as well as inverted or not. The Revo Bee32 also features DFU free updating and a self-healing and updating bootloader, just in case something does go wrong.


  • Integrated vibration dampening dummies
  • MCU : STM32F405
  • On-board Betaflight OSD 
  • Integrated LC Filter
  • High Speed 32khz gyro(ICM-20608), lowest noise floor and highest sensitivity gyro ever used
  • FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus and other radio support
  • Integrated buzzer driver
  • ESC flashing and configuration built into configurator
  • Built-in 5v voltage BEC 
  • Dimensions: 30mm x 30mm
  • Mounting holes: 20mm squared to center of holes

Mini F4 32K Flight control SPECS

  • Item name : F4 32K Revobee32 FPV Stack
  • Weight : 11g
  • Dimensions: 30mm x 30mm
  • Mounting holes: 20mm squared to center of holes

iPeaka 18A Dshot ready 4-in-1 ESC SPECS

  • Item name : iPeaka 18A 4-in-1 ESC 
  • Weight : 8g
  • Dimensions: 30mm x 30mm
  • Mounting holes: 20mm squared to center of holes
  • Continuous current 18A and 25A burst per motor
  • Supply voltage 2-4S Lipo
  • Silabs EFM8BB21F16G 50mhz MCU 
  • BLHeli_S firmware
  • Top quality MOSFET
  • 3oz high TG PCB board 

The iFlight Guarantee 

In addition to all the other amazing things the REVO Bee32 presents, Team iFlight FPV get access to iFlight’s tech support which will include step-by-step help with installation, tuning, and anything else that may arise with your REVO Bee32. We have by far the best support system and community in the industry. Join our slack and talk to other users, or contact support directly.

Package included:

  • 1pc x Revo Bee32 Mini F4 flight controller with OSD/BEC 
  • 1pc x iPeaka 18A Dshot ready 18A 4-in-1 ESC


Shipping Weight: 50g