Skip to content
IMPORTANT CHANGES TO SHIPPING AND PICK-UP POLICIES
IMPORTANT CHANGES TO SHIPPING AND PICK-UP POLICIES

Heli Nation Talon F7 V2 MPU6000 20x20 Flight Controller

USD $32.99

 Heli Nation Talon F7 V2 MPU6000 20x20 Flight Controller

 

Continuing the huge success of Talon F7, Heli-Nation is releasing the Talon F7 V2 with MPU6000. 

This F7 flight controller pairs well with the Aikon AK32 4in1 35A 6S 20x20 ESC  or Talon Gigawatt V2 that we also carry. In our opinion, this combo makes the best 20x20 flight stack on the market. It can do up to 6S while maintaining a small footprint. If you're looking for other options, Spedix GS25A and Airbot Ori32 work too. 

 

Specifications

  1. MCU: STM32F722RET6 216MHz
  2. Proven noise-free MPU6000
  3. Built in Betaflight OSD
  4. Up to 8S (36V) direct battery power
  5. Buzzer pads for external buzzer
  6. Built in voltage monitoring resistor
  7. 5V 2A BEC
  8. Dedicated LDO for Gyro, noise free gyro power
  9. Dedicated LDO for OSD, cleaner OSD signal
  10. Led strip shares 5V with 5V/2A BEC
  11. 6 UARTS: UART1, UART2, UART3, UART4, UART5, UART6
  12. Built in camera control pin with resistor and capacitor
  13. 5 Full UARTS with RX AND TX pins
  14. Logical pin layout for cleanest build possible
  15. 8 pin 4 IN 1 ESC plug
  16. Remapable LED pad for additional motor output
  17. TX3, RX3 can be used for I2C for external compass
  18. 5V, VBAT selectable VTX and CAM power
  19. 16M Blackbox flash chip
  20. No flicker VTX pit mode switch (positive switch)
  21. M4 Can be selected either led_strip signal or M4 signal for RPM filtering
  22. 20 X 20 mounting hole with true 25mm board dimensions

To get Motor 4 to work please use the CLI command below using Betaflight V4.0.4. A custom hex is coming soon for 3.5.7 and 4.0.4.

  • Resource MOTOR 6 None
  • Resource MOTOR 4 C08
  • Save

 

To get 5V to your VTX please go to the mode tab in Betaflight and setup a mode switch for vtx_pit




TOP LAYOUT

Heli Nation Talon F7 V2 MPU6000 

BOTTOM LAYOUT

 Heli Nation Talon F7 V2 MPU6000

 Heli Nation Talon F7 V2 MPU6000

Includes

  • 1x Flight Controller
  • 3x Pin connectors (Aikon AK32, Spedix GS25 and Airbot Ori32 compatible)
  • 1x Hardware set

 __________________________________________________________________________

Why buy from AirBlade UAV:

  • Fast and Affordable Shipping: We ship everyday from Vancouver, Canada using USPS (US orders), Canada Post (Canada & International orders), UPS and DHL. Learn more about our Shipping Policies.
  • Top Notch Customer Support: We put our customers’ interest ahead.
  • Complimentary Free Shipping: We offer free shipping for qualified US orders over $100 and qualified Canada orders over $250.
  • High Quality Products: Most products we carry are tested extensively by our team of experienced pilots. We only carry products we would personally use.
  • Latest Selection: We frequently refresh our stock selections to offer you the latest gears.
  • Support Community: We support local and international FPV communities and sponsor racing leagues where we see fit.

 

 

Shipping Weight: 40g