Happymodel Crazybee F4 Pro V2.0 FC 1S-3S

Save 5%
Original Price USD $41.99
Current Price USD $39.99
Receiver

Crazybee F4 Pro V2 FC 1S-3S

This is version 2 of the popular Happymodel Crazybee F4 Pro Flight Controller (CBF4 V2). This is the same F4 flight controller that is used in the Happymodel Mob7 HD Cinewhoop kit. You can now build your own cinewhoop with this FC and other components of your choice. This is also a good flight controller if you're looking to build a 65mm toothpick-style micro drone like the AirBlade Creampuff Lite or the Kabab FPV Toothpick frame. Pair this with 1103 motors like the AirBlade AB 1103 8000kV or AB 1103 10000kV

In version 2, Happymodel has incorporated feedback from pilots to make this flight controller 3S capable. The biggest changes are 

  • V2.0 could handle 1-3s Lipo/LiHV while V1.0 could handle only 1-2s Lipo/LiHV
  • V2.0 use bigger bind and boot button , change the BAT/GND pad to “through hole”

Specifications

  • Flight controller:

    • MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
    • Sensor: MPU-6000(SPI connection)
    • Board size: 28.5 * 28.5MM
    • Power supply: 1-3S battery input (DC 3.5-13V)
    • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
    • ESC MCU Upgraded to EFM8BB21
    • Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
    • Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS-2A Compatible)
    • DSMX version Built-in Serial-based DSM2/DSMX compatible satellite receiver(Default RX2 was used for DSM2/DSMX receiver)
    • No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS and Dsm2/DSMX, Ibus protocol etc.
    • Built-in Betaflight OSD (SPI Control)
    • Built-in Current meter sensor Max up to 28A
    • Current meter scale set to 1175
    • Built-in 5V 1A Buck / Boost with LC filter
    • Built-in voltage detection
    • BLHELI_S pass-through Ready
    • Multi Serial port support
    • Fully compatible with almost Brushless whoop drone
    • Weight:4.3g

 

  • ESC

    • MCU upgraded to EFM8BB21
    • Power supply: 1-3S LiPo/LiPo HV (3.5v/13v)
    • Current: 5A continuous peak 6A (3 seconds)
    • Support BLHeliSuite programmable
    • Factory firmware: S_H_50_REV16_7.Hex
    • Default protocol: DSHOT600

 

  • Firmware target:

    • Frsky version  betaflight_4.0.0_CRAZYBEEF4FR.hex
    • Flysky version betaflight_4.0.0_CRAZYBEEF4FS.hex
    • DSM2/DSMX version betaflight_4.0.0_CRAZYBEEF4DX.hex
    • No RX version betaflight_4.0.0_CRAZYBEEF4DX.hex


      Package included:

      • 1 x Crazybee F4 PRO V2 flight controller
      • 3 x Power cables
      • 1 set Shock absorbing rubber and screws

        __________________________________________________________________________

         Why buy from AirBlade UAV:

        • Fast and Affordable Shipping: We ship everyday from Vancouver, Canada using USPS (US orders), Canada Post (Canada & International orders), UPS and DHL. Learn more about our Shipping Policies.
        • Top Notch Customer Support: We put our customers’ interest ahead.
        • Complimentary Free Shipping: We offer free shipping for qualified US orders over $100 and qualified Canada orders over $250.
        • High Quality Products: Most products we carry are tested extensively by our team of experienced pilots. We only carry products we would personally use.
        • Latest Selection: We frequently refresh our stock selections to offer you the latest gears.
        • Support Community: We support local and international FPV communities and sponsor racing leagues where we see fit.

         

         

        Shipping Weight: 40g