Skip to content
SHIPPING NOTICE: We will be away between Feb 16-Mar 3 inclusive. Shipping resumes Mar 4. CLICK HERE for offer!
SHIPPING NOTICE: We will be away between Feb 16-Mar 3 inclusive. Shipping resumes Mar 4. CLICK HERE for offer!

BetaFPV F4 AIO Flight Controller 2S-4S 12A

Sold out
USD $39.99

 BetaFPV F4 AIO Brushless Flight Controller 2S-4S 12A

Since the second batch, we upgrade the board to V1.2, which add the support of Frsky R9M receiver and DSMX receiver.

Light weight and easy install, this F4 2-4S AIO FC (BLHeli_S) weighs only 5.6g and is integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD and 2-4S 12A ESC which can support 4S battery for fast flying experience. 

 The higher ESC rating really opens up a whole new world of possibilities. You can build ultra-light micros like the AirBlade Creampuff Lite or KababFPV Toothpick with AirBlade 1103 8000-10000kV. You can build powerful micros with bigger motors like the AirBlade 1105 10000kV or EMAX 1106 

Recommended Battery and Motor combo: 

Battery Motor Combo
2S 1103 10000kV
3S 1103 8000kV or 1105 6000kV
4S 1105 5000kV

 

Are you curious about how it performs with a toothpick build? Let us enjoy the testing by Totofpv.

 

Amazing, See how the FC handle 3S on full throttle!!

Specifications - Flight Controller

    • CPU: STM32F411CEU6 (100MHZ )
    • Six-Axis: MPU6000 (SPI connection)
    • Size: 26mm x 26mm, whoop mounting pattern
    • Firmware version: Betaflight MATEKF411 (MK41)
    • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
    • Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and DSMX receiver since V1.2.
    • Support programmable LED like WS2812 etc
    • Built-in current sensor
    • Weight: 5.6g

    DIAGRAM FOR BETAFPV F4 2-4S AIO FLIGHT CONTROLLER 

      

       

    Specifications - ESC

    • Support BLheli/BLHELI_S suite Pass-through ready
    • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
    • Input voltage: 2S-4S Lipo
    • Continue current: 12A
    • Peak current: 13A
    • Firmware: BLHELI_S
    • Processor: SILABS EFM8BB21F16G
    • Motor Connectors: 1.25mm header pins connector
    • Factory firmware: G-H-30-16.7

    Could the ESC on this AIO board support really 4S battery?

    Yes. But please pay more attention to the motors. Here are two situations that the motor will burn itself and then the ESC frequently. 

    Situation 1: The motor's KV value is too high and could not stand the 4S power. For example, the BETAFPV 1105 6000KV motors could not stand the 4S power in aggressive flying. So we are working on a lower KV 1105 motor that could use with 4S battery. It will be released soon.

    Situation 2: A poor quality motor will result in the fire accident in 4S power.

    For the moment, no 0x0x/1102/1103 motors could stand 4S power for the moment in the market. Please make sure your motors could support the 4S battery before any try.

    HOW TO CONNECT THE EXTERNAL RX TO THE FC

    Here is the connection diagram with Frsky XM+ receiver or AC900 Dual Mode Receiver (FrSky & FUTABA).

    Here is the connection diagram with FS-RX2A receiver.

    Here is the connection diagram with TBS Crossfire receiver.

    STATUS LED

    There are 3 LEDs on the bottom of the board to indicate the status, including Receiver LED ( Green), FC Status LED ( Blue ) and FC Power LED ( Red ). 

    LED  Status  Description
    Mode LED (Green)  Solid Horizon Mode/ Angle Mode
    Mode LED (Green)  Extinguished Acro Mode
    Power LED (Red)  Solid  Power on
    Status LED (Blue)  Solid  Motor Armed

    BUILT-IN CURRENT METER

    This is our first whoop FC board that have current sensor built-in. So no need to use the virtual current meter and you could get a more accurate current value. In order to use this current sensor hardware, some configurations in Betaflight GUI are needed. In the "Power & Battery" tab:

    Then when flying, you could find the real current value from the OSD information. Of course, the current sensor is configured well in the factory and you do not need to change it as usual.

    Know more about current sensor and calibration.

    PACKAGE

    • 1x F4 2-4S brushless flight controller with XT30 Plug
    • 4x M1.2x4mm screws
    • 4x M1.4x5mm screws
    • 4x Anti-vibration rubber dampers  

    __________________________________________________________________________

    Why buy from AirBlade UAV:

    • Fast and Affordable Shipping: We ship everyday from Vancouver, Canada using USPS (US orders), Canada Post (Canada & International orders), UPS and DHL. Learn more about our Shipping Policies.
    • Top Notch Customer Support: We put our customers’ interest ahead.
    • Complimentary Free Shipping: We offer free shipping for qualified US orders over $100 and qualified Canada orders over $250.
    • High Quality Products: Most products we carry are tested extensively by our team of experienced pilots. We only carry products we would personally use.
    • Latest Selection: We frequently refresh our stock selections to offer you the latest gears.
    • Support Community: We support local and international FPV communities and sponsor racing leagues where we see fit.

     

     

    Shipping Weight: 50g