AirBlade Intrepid 3K Carbon Fiber Frame Kit 3"/4"/5"

USD $39.99

Based on feedback from AirBlade team pilots, the AirBlade Intrepid was born.

The design allows batteries to be mounted on top—no more skidding your precious lipos on concrete ground. The top plate can accommodate popular batteries up to 1300mah 4S. 

The front camera cage was designed specifically for RunCam Mini Swift with adjustable angles. The camera mounting holes let the FPV camera slide back and forth depending on your preference. 

The top plate height is fixed at 20mm. It has provision for Team BlackSheep TBS SMA pigtail as well as a small guide for your cables. 

The bottom plate has slot for flight controller mounting. This allows you to mount any flight controllers with a square pattern between 20 to 30mm distance. 

The skinny arm design allows for better airflow and flight characteristics. 

The frame is available in 3 different sizes: 3" 4" and 5". 



  • Available in 3 different sizes: 3", 4" and 5" 
  • Bottom plate: 3mm (3"), 3.5mm (4") and 4mm (5")
  • Top plate and side plates: 2mm 
  • True X design 
  • Weight with hardware: 85g (5"), 68g (4"), 50g (3")
  • Options for both top and bottom mounted batteries 
  • Accomodate various battery sizes, up to 1300mah 4S 
  • Mounting holes for various flight controller sizes: 20x20 to 30x30 and anything in between 
  • Optional add-on to mount GoPro Session or RunCam 3



  • 1 x Bottom Plate 3K Carbon Fiber (3mm for 3", 3.5mm for 4" and 4mm for 5")
  • 1 x Top Plate 3K Carbon Fiber (2mm)
  • 2 x Front Plates (2mm) 
  • 1 x Hardware pack



Shipping Weight: 150g-200g