Skip to content
PLEASE BE ADVISED THERE MAY BE DELAYS WITH USPS AND CANADA POST DURING THE BUSY HOLIDAY SEASON
PLEASE BE ADVISED THERE MAY BE DELAYS WITH USPS AND CANADA POST DURING THE BUSY HOLIDAY SEASON

Matek Flight Controller F722-Mini 20x20

Sold out
USD $44.99

 Matek F722 Mini 20x20 F7 Flight Controller 

Matek Systems is well known for their reliable electronics. This is their new 20x20 flight controller that sports a powerful F7 chip. Matek introduce a clever design with a PCB adapter board. With this adapter you can either make it a 20x20 flight controller or 30x30 flight controller. This allows the flight controller to be used in larger 5 inch mini quads or smaller 3 inch micro quads. 

The F722-Mini comes with the latest features such as dual gyro choices (MPU6000, ICM20602), VTX power switcher, dual camera switching, and 2-8S input voltage!

 

Specifications 

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • OSD: AT7456E (SPI)
  • Blackbox: 32M-byte Flash memory (SPI)
  • Baro: No barometer built-in.  support external barometer module (I2C)
  • 5x Uarts (1,2,3,4,6) with built-in inversion
  • 1x Softserial supported
  • 8x Dshot/Proshot/oneshot outputs
  • 1x I2C
  • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Vbat filtered output power for VTX,  Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Convertible 20mm to 30.5mm mounting
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed

Power

  • Input: 6~36V (2~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in - supports external current sensor of PDB/4in1

FC Firmware

  • BetaFlight / INAV
  • Target: MATEKF722SE

Firmware download

Manual download

Dimensions

  • Mounting
    • 20 x 20mm/Φ3mm with Silicon Grommets
    • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
    • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
  • Dimensions:  28 x 28 mm
  • Weight: 5g

Includes

  • 1x FC F722-mini
  • 1x 20mm to 30.5mm conversion plate
  • 6x Silicon grommets M4 to M3
  • 6x Brass grommets M3 to M2
  • 1x SH1.0_8pin cable 5cm
  • 2x SH1.0_8pin connectors

 

__________________________________________________________________________

Why buy from AirBlade UAV:

  • Fast and Affordable Shipping: We ship everyday from Vancouver, Canada using USPS (US orders), Canada Post (Canada & International orders), UPS and DHL. Learn more about our Shipping Policies.
  • Top Notch Customer Support: We put our customers’ interest ahead.
  • Complimentary Free Shipping: We offer free shipping for qualified US orders over $100 and qualified Canada orders over $250.
  • High Quality Products: Most products we carry are tested extensively by our team of experienced pilots. We only carry products we would personally use.
  • Latest Selection: We frequently refresh our stock selections to offer you the latest gears.
  • Support Community: We support local and international FPV communities and sponsor racing leagues where we see fit.  

 

Shipping Weight: 30g